Maintenance of Cimentitious Floor
Cimentitious floor will be destroyed by external factors during usage. Dusting, chalking and other defects due to abrasion, water erosion, weathering, etc. will seriously influence appearance and service life of floor, and will pollute the environment and affect rate of finished products of workshop.Cimentitious floor is often polluted by oil, carbon black, dust of rubber and other pollutants because of its relative loose. In order to prevent dusting, chalking, keep clean, cimentitious floor needs cleaning and maintenance, getting a protective film on its surface. The coating can seal the pores in the surface, isolate moistures, preventing stains and dusts penetrating or polluting the floor. The light reflection performance of protective film can provide a good working environment. Sinopolymer promotes a maintaining proposal for floor, which can effectively restrain chalking, dusting and prevent sticky dirties; so that keep the whole floor good appearance, and more clean the air in a confined space. All the materials are water-borne non-toxic, odorless, environmental friendly in the proposal, and the application is so simple and fast. It can meet the requirements of foodstuff, tobacco, electronics, precision instruments, medicine, medical operating rooms, motors and airports with the materials and construction time. At the same time, the operation is so simple that daily cleaning staff can be competent.
Description:
Recommended products: Primer: Sinopolymer floor sealer, colored floor sealer;Top coat: Sinopolymer Super Floor Finish, Sinopolymer oily acrylic finish paint, wet- set polyurethane finish paint, wet-set colored polyurethane finish paint.Auxiliary products: Aqueous-based Degreaser, Sinopolymer All Purpose Cleaner, Sinopolymer Floor Acidizing fluid.
Process:
1. Floor Cleaning and acidizing:Wash the floor with Sinopolymer All Purpose Cleaner (Dilute with water1:30); if add a little of Sinopolymer Aqueous-based Degreaser (1:50), degreasing effect will be enhanced; add the above degreaser (1:8) to heavy greasy places for deep cleaning. Rinse with clear water, and then dry.For the floor of stronger alkalinity, dilute acidizing fluid with water 1:20, then spray to the floor to acidize. 2. Sealing of floor:Coating a layer of Sinopolymer Floor Sealer evenly by clean synthetic fiber mop, dry at least 60min (drying time depends on ventilation, humidity, temperature, etc.). After dry absolutely, recoating the second layer of the floor sealer. When the above work finishes, curing at least 1~2 hours.
3. Top coat:
Coating a layer of the selected top coat material evenly by clean synthetic fiber mop, dry at least 30min (drying time depends on ventilation, humidity, temperature, etc.). After dry absolutely, recoating the second, the third layer of the floor finish. When the above work finishes, curing at least 24 hours before vehicle traffic.
4. Daily maintenance:Clean the floor at regular intervals by mop on which dust inhibitor has been sprayed.
Website: http://www.sinopolymer.com.cn Phone: (86) 21-51592806 (86) 21-51592807 Fax: (86) 21-51592805 Zip: 200231 Address: Room 516, No4# Building, 218 Yindu Rd. Xuhui District, Shanghai
E-mail: marketing@sinopolymer.com.cn (Marketing Dept.)