Maintenance of PVC and Rubber Floor
Proposal for the maintenance of PVC and Rubber Floor
Although epoxy floor has the advantages of wear resistance, impact resistance, resistance to chemicals such as acid, alkali, salt and solvent and so on, and no dusting. But it also has the weaknesses as below: Not endure scrape or scratch; Difficult to repair after being scraped or scratched; Black rubber tire tracks easy come into being; No sufficient of friction coefficient and still easy to slide.In fact, many users tend to ignore the daily care of epoxy floor, which makes the floor easy to be scraped or scratched, and cause shortening the life of epoxy floor and decrease its appearance greatly.
Sinopolymer promotes a maintaining proposal for floor, which can effectively restrain the wearing of epoxy floor and prevent sticky dirties; so that keep the whole floor good appearance, and more clean the air in a confined space. All the materials are water-borne non-toxic, odorless, environmental friendly in the proposal, and the application is so simple and fast. It can meet the requirements of foodstuff, tobacco, electronics, precision instruments, medicine, medical operating rooms, motors and airports with the materials and construction time. At the same time, the operation is so simple that daily cleaning staff can be competent.
Description:
Floor material: Epoxy Recommended products: Sinopolymer Super Floor Finish, Sinopolymer Aqueous-based Degreaser, Sinopolymer All Purpose Cleaner, Sinopolymer Stripper
Process:
1. Floor Cleaning:Wash the floor with Sinopolymer All Purpose Cleaner (Dilute with water1:30); if add a little of Sinopolymer Aqueous-based Degreaser (1:50), degreasing effect will be enhanced; add the above degreaser (1:8) to heavy greasy places for deep cleaning. Rinse with clear water, and then dry.2. Polishing:Coating a layer of Sinopolymer Super Floor Finish evenly by clean synthetic fiber mop, dry at least 30min (drying time depends on ventilation, humidity, temperature, etc.). After dry absolutely, recoating the second, the third layer of polish. When the above work finishes, curing at least 24 hours before traffic.3. Daily maintenance:Clean the floor at regular intervals by mop on which dust inhibitor has been sprayed.4. Remove old polish layer or repair:Recoat or sectional repair the polish film according to the damage degree after a certain time (usually about 6 months.). Dilute the Sinopolymer Stripper with 20 times of water, remove the existing polish films and all kinds of dirty marks by washing machine, coating the super floor finish again.
Website: http://www.sinopolymer.com.cn Phone: (86) 21-51592806 (86) 21-51592807 Fax: (86) 21-51592805 Zip: 200231 Address: Room 516, No4# Building, 218 Yindu Rd. Xuhui District, Shanghai
E-mail: marketing@sinopolymer.com.cn (Marketing Dept.)